Accolade Fencing

09/10/2026

A steep front yard and a customer who did not want fence brackets. Here is how we made it work.

This custom vertical slat fence uses 65x16mm aluminium slats at an 8mm gap, in a fully welded 50mm square aluminium frame. On a slope like this one, brackets would have left the gaps varying from panel to panel, and that was the one thing the customer did not want to see.

So every panel was made to its own size and rake. Level across the top, raked and tapered along the bottom to follow the ground, with plates welded on so each panel screws straight to the post. The gaps stay consistent across the whole front yard.

Either side of the driveway there is a single corner panel with a step cut-out in the bottom. We kept the slat gaps consistent through the corner as well, so the two sides match.

All of it was fabricated to the customer's measurements at our Deception Bay workshop.

Got a sloping block? Comment or send us a message with a photo and the rough fall across the fence line, and we will tell you what we can make.

See the project and our aluminium fencing range here:
https://accoladefencing.com/products/aluminium-fencing/

07/10/2026

Adding a gate to a fence that is already there? It has to fit the gap and match what is beside it.

This custom Zeus aluminium sliding gate was made for the driveway of a residential complex. We had the frame CNC routed to suit the opening, then welded in 25mm square pickets with pressed spear tops so the gate lines up with the spear top fence panels on either side.

Once it was welded, the whole gate was powder coated in black to match the existing fence panels on site.

It was fabricated to the customer's measurements at our Deception Bay workshop. That is the difference with a custom welded gate: it is made for your opening and your fence, not picked from a list of standard sizes.

Got a driveway that needs a gate to match an existing fence? Comment or send us a message with a photo and the width of the opening, and we will tell you what we can make.

See the project and our gate range here:
https://accoladefencing.com/products/gates/

26/09/2026

Got a Colorbond® Dune roof or trim? Meet its GramLine® match: Birch.

This job is a long run of GramLine® steel privacy fencing in Birch. It wraps around the back yard, runs down the side of the house, then steps down to a lower height toward the street. Panels, posts and rails are all finished in the same colour, so the whole boundary reads as one clean, continuous line.

GramLine® colours line up with the Colorbond® range under their own names, so matching a new fence to your house is simple. Birch is one of the 31 colours we keep in stock at our Deception Bay warehouse, and every GramLine® fence comes with a 10-year written perforation warranty.

Everything was supplied in kit form to the customer's measurements.

Not sure which colour suits your place? Comment or send us a message with a photo of your house and we will suggest a match. Or drop into the warehouse and see the colours in daylight before you choose.

See the project and the GramLine® range here:

https://accoladefencing.com/products/gramline-steel-fencing/

18/09/2026

One driveway, one look. A RAD batten sliding gate with a matching pedestrian gate, both in Surfmist.

The customer wanted the whole frontage to read as one piece, so we made both gates from 40x40 aluminium battens on 40x40 rails and powder coated them in Surfmist, a soft off-white that sits beautifully against the stone pillars and the rendered wall.

The sliding gate runs the full width of the driveway on a track. On a block like this one a swing gate would need clear space to open, so sliding was the right call. The pedestrian gate uses the same batten spacing, so from the street the two look like they were always meant to be together.

Both gates were made to the customer's measurements in our Deception Bay workshop. We size the gate, the track and the hardware to your actual opening, not to a standard kit.

Planning a new gate? Send us the width of your opening and a photo of the fence line and we will quote it.

See the project and our gate range here: https://accoladefencing.com/products/gates/

03/09/2026

YOUR NEXT FENCE COULD LOOK THIS GOOD. 🤍

A beautifully finished RAD Batten fencing system manufactured by Accolade Fencing in our Pearl White finish.

Designed with 40×40 rails, 40×40 battens and a 30mm gap, this combination creates a clean architectural look while maintaining privacy and security.

The matching pedestrian gate completes the frontage with a seamless, premium finish.

✨ Custom manufactured
✨ Pearl White finish
✨ 40×40 aluminium battens
✨ 30mm spacing
✨ Matching gate

Whether you're building a new home, upgrading an existing property or working on a landscaping project, we can manufacture fencing to suit your design.

📍 Deception Bay | North Brisbane | Brisbane

📩 Contact Accolade Fencing for your next project.

20/08/2026

45 metres of custom vertical slat fencing, all the way up at Rainbow Beach.

This one travelled about 200km from our Deception Bay workshop. The customer wanted a clean, modern boundary with full privacy, so we made 2.0m high panels with 6​5x16mm vertical slats and no gap between them, powder coated in an off-white finish matching Colorbond® Surfmist.

The contractor collected the panels from us and installed the whole boundary. The result speaks for itself.

Every order is made to your measurements and colour, whether the fence is going up around the corner or a few hours up the coast. If you have a project in mind, send us your fence line and we will quote it.

See the project and our aluminium fencing range here:
https://accoladefencing.com/products/aluminium-fencing/

19/08/2026

15/08/2026

24/07/2026

🔥 Crafted with Precision at Accolade Fencing 🔥

Here's another custom project proudly manufactured in our Deception Bay workshop.

This project included:
✅ Raked Custom Vertical Slat Sliding Gate – 6.650m wide x 1.900m high with a modern 10mm gap design
✅ Matching Pedestrian Gate
✅ Gramline Fence finished in the stunning Teatree / Gun Metal Green colour combination

At Accolade Fencing, we manufacture custom fencing and gate solutions for homeowners, builders, landscapers, fence contractors, and developers across Southeast Queensland. Whether your project is residential or commercial, we can manufacture fencing and gates to suit your exact requirements.

Looking for:
✔️ Vertical Slat Gates
✔️ Sliding Gates
✔️ Pedestrian Gates
✔️ Aluminium Fencing
✔️ Gramline Fencing
✔️ Custom Gates & Fabrication

We've got you covered.

📍 Proudly manufactured in Deception Bay, QLD.

📞 Contact Accolade Fencing today to discuss your next project

10/07/2026

🌿 Proud to deliver this custom garden panel in Primrose/Domain colour.

We recently manufactured a custom garden panel in the Primrose/Domain finish for a wonderful customer in Deception Bay, and seeing their outdoor space come to life truly reminds us why we love what we do. 🏡

At Accolade Fencing Pty Ltd, we’re committed to producing high‑quality aluminium pool panels, garden panels, gates, and sliding gates, all manufactured locally in Deception Bay. Every job is built with care, precision, and the durability Queensland homes deserve. 🔧

If you’re upgrading your backyard, securing your pool area, or looking for a custom fencing solution, our team is here to help bring your vision to life. ✔️