30/09/2026
Temple in the Trees (Anglesea) – 3D Concept for Part 2 & 3 of the brief.
A lift has been incorporated into the main residence, which allows for ease of access across the existing 3 floors. This required the creation of additional internal space at the mid and upper levels via minor encroachments into the existing decking areas, with the Ground floor Cellar and Storage reconfigured slightly.
The existing pergola which was designed by our office and built in 2013 as part of a major alterations and additions project, is now to be extended to fully cover the existing North West facing rear deck to make this space more usable. Additional timber members are proposed to run perpendicular to the existing members, where they meet at the existing angled double beam. We propose to mount 5 no. motorised blinds externally to protect this deck from the wind and rain.
Existing timber handrails at the end of the ramp to be cut back, with an additional vertical post to be installed on either side, providing a gap for the blind to reach the floor level of the deck and provide more enclosure. We are aiming for the steel support members to be as minimal as possible to reduce any impact on the views when the blinds are open (as shown in open and closed position).
A glazed roof is also proposed and is to be supported by graded timber battens running in line with the existing pergola beams, stopping at the existing angled double beam. Tapered timber battens then sit above and in line with the new pergola beams. Aluminium glazing supports will be mounted over.
A sculptural structure could provide additional undercover protection for further cars within the generous front setback of the property, which we would aim to design to minimise disruption to the existing native vegetation.