Strip Tec UK

21/10/2026

Controller in hand, the match is only half over, and the big overhead light has not been switched on all evening. It has not needed to be.

That's the honest test of any gaming room. Late in the evening, mid session, main light off. The day it's first set up tells you very little.

Run strips at several heights: along the ceiling, under the shelves, behind the desk and along the skirting. The glow comes from all around the room, so there's no single hard point of light overhead. ✨

Choose a warm white tone and the screen stays the brightest thing in the room without being the only light in it. The space around it still feels lived in, like a proper evening in with the kit switched on.

Light the room for the session and you're never reaching for the wall switch halfway through a match. 💡

Picture your own setup at that hour. Which height would you light first? Tell us below.

19/10/2026

The most striking rooms are rarely the brightest ones. They light one thing well and let the rest fall away.

That's the quiet trick behind a compact adjustable spotlight. Restraint does the work, and the magic is all in the aim. Adjust the head and the beam lands on the one shelf, page or object that deserves it, instead of spilling across the whole room.

Lighting a single focal point is a simple way to use only the light a moment actually needs. It's a considered design decision, and it looks more dramatic too. 💡 It is 12V DC low voltage and also comes with a USB-C charging port.

One well aimed light often does more for the feel of a room than several left on at once.

16/10/2026

Every seamless line of light starts with a strip you can hold in your hand.

On a COB (chip on board) strip, the phosphor runs as one continuous line along its length. That is where the smooth, unbroken glow comes from. The circuit that drives it sits on the strip itself, so one ribbon of light is a complete, engineered piece of kit. 💡

Marked cut points let you trim it to the length of your run, and the adhesive backing fixes it straight onto a surface or into a channel.

It's the quiet foundation of every seamless line of light our customers create.

14/10/2026

The media walls that stop people in their tracks were never lit after the joinery went up. The light was already in the drawing on day one.

For joiners, interior designers and electricians sharing a feature wall, it pays to treat it as one job from the start. Here's what we'd plan in early.

💡 The light line is part of the joinery. The recess or gap that holds the strip belongs in the joiner's plan before a single panel is cut.

When the strip traces every edge of the pattern, the panelling reads as a deliberate shape after dark. Leave it out and those lines simply disappear into shadow.

Frame the TV and media console with light and the screen becomes the centrepiece of the wall. Without it, you're left with a black rectangle hanging there.

A bold colour like the red in this room sets the whole mood. Agree the client's colour early, because it shapes how the wall is designed as well as how it's lit.

Then show the client the wall both ways. A strong panelled wall looks finished in daylight and transformed at night. ✨

Plan the joinery and the lighting together, and the wall looks designed from the first cut to the final switch.

12/10/2026

You never see who games here, and you don't need to. The light has already told you everything about them.

Follow the lines around the room. A soft trace along the ceiling. A warm glow tucked under each shelf. Light beneath the desk, and a low line running along the skirting.

Lighting the edges at each height is what gives a room its shape. A spare room with a single lamp in it reads as a box. Add light at ceiling, shelf, desk and floor level, and the room takes on depth.

The screen is still the star. The warm light around it simply holds the rest of the room out of darkness, so the space feels calm and lived in, even late into the evening.

One warm white is carried through every line. That consistency is what makes the room feel designed as a whole, with each line of light belonging to the same idea. ✨

A spare room can become the most personal room in the house when the light is chosen for how its owner spends their evenings. 💡

09/10/2026

A patio becomes an outdoor room the moment the light sits above the table.

Here is how to get festoon lights right, from the first measurement to the next summer evening. Every tip holds true whatever brand of festoon lights you already own.

💡 Choose
Start with a tape measure. Measure the route between your fixing points and allow extra for a gentle drape. A line pulled tight looks stiff and strains every fixing.
Then work out where your power comes from. The route back to the socket often decides which end you start from, so plan the layout around it.

Hang
Run the line across the dining table, over where people actually sit. The light lands on faces and the space reads as a room.
Fix to something solid, such as a pergola, a wall or a sturdy post. Guttering, trellis and fence panels flex in the wind and loosen the run over time.

Keep
At each change of season, check every bulb is seated firmly and every socket is clean and dry. Replace a failed bulb promptly so the line stays even.
Before stormy weather, secure or take down any loose sections so the cable isn't left swinging against its fixings.

Give the garden the same thought as the living room, and it will hold that warm glow evening after evening. ✨

07/10/2026

After sunset, your garden is still there. It's simply waiting for one light pointed in the right direction. 🌿

The best garden lighting is selective. One spike spotlight aimed at one favourite plant gives the whole garden a focal point after dark, and it feels far more considered than washing everything in light.

A spike spotlight stakes straight into the flowerbed, so the light lives among the planting rather than on a wall or fence. Place it low and angle it up into the foliage.

Choose your plant with care. Ferns and other plants with strong leaf shape and texture catch the light and give the bed real depth once the sun has gone.

Keep the light warm. A warm white glow makes the garden feel like an extension of the home, a calm view from the window as much as a place to sit. 💡

Which plant would you light first? Tell us below. A garden spike spotlight is the easiest place to start.

05/10/2026

Engine off. Kettle on. Nowhere else to be tonight.

The road is done, the view through the windscreen is new, and the space inside is as familiar as ever.

Living room, kitchen and bedroom in one. A room only a few steps long, where every detail carries the whole feeling of the place, cared for as much by night as by day.

Often the best part of the trip is the stop. The lay-by, the quiet, the cup of tea before bed.

28/07/2026

14/07/2026

✨ Create stunning lighting effects with the StripTec 5M CCT IC COB LED Strip Kit! ✨

Take your lighting to the next level with premium COB technology and IC chasing effects that create beautiful flowing animations without compromising the seamless COB finish.

Perfect for kitchens, media walls, bedrooms, shelving and bespoke installations.

✅ Seamless COB LED technology
✅ IC Chasing & Waterfall lighting effects
✅ Adjustable White (2700K–6500K)
✅ Touch Wall Plate Controller Included
✅ Dimmable brightness & effect speed control
✅ 24V Low Voltage
✅ Plug & Play Installation
✅ Premium quality for a professional finish

Whether you want a warm, relaxing glow, crisp cool white task lighting, or eye-catching dynamic waterfall and chasing effects, the StripTec IC COB Kit delivers exceptional performance and style.

💡 Upgrade your lighting today.

🛒 Shop now at https://www.striptecuk.com/product/striptec-5m-cct-ic-led-strip-kit-ip20/