Mook studio

ㄴ

30/09/2026

STILL, WE HOLD.
Inspired by Matisse’s The Dance. In a world divided by war and fear, we still reach for one another.
As AI reshapes our world, human warmth matters more.

29/09/2026

마티스의 《춤》에서 영감을 받은 [STILL, WE HOLD]은
사람의 온기가 중요해진 시대, 서로를 붙잡고 기대며 관계를 이어가는 인간의 모습을 이야기합니다.

#카페트 #러그 #러그인테리어 #러그추천 #터프팅

28/09/2026

STILL, WE HOLD.
Inspired by Matisse’s The Dance. In a world divided by war and fear, we still reach for one another.
As AI reshapes our world,

24/09/2026

ZQ-III Tufting Air Gun Tutorial | EP.3- 터프팅건
Needle, Feed Wheel & Presser Foot Setup

The desired pile height cannot be achieved by changing the needle alone.

The needle length must match the amount of yarn supplied by the feed wheel. The presser foot must then be positioned correctly to complete the setup.

In Episode 3, we demonstrate:

• Selecting the correct needle and feed wheel for the desired pile height
• Replacing the needle and installing the retaining ring
• Replacing the feed wheel and checking the yarn-feed mechanism
• Adjusting the presser foot with the needle fully extended
• Setting a gap of approximately 2–3 mm between the needle tip and the presser foot

The three fundamentals of tufting air gun setup are:

Pile height → Needle and feed wheel combination → Presser foot position

When these three elements are properly aligned, the yarn feeds consistently and the gun produces the intended cut-pile height.

#터프팅 #터프팅건 #터프팅공방

23/09/2026

ZQ-III Tufting Air Gun Tutorial | EP.2
Basic Operating Principles

In Episode 2, we take a closer look at how the ZQ-III Tufting Air Gun works.

The motor’s rotational movement is converted into the reciprocating motion of the needle through the internal linkage system. At the same time, the feed wheel advances the yarn, the needle pushes it through the backing cloth, and the scissors cut the yarn to form the cut pile.

For the tufting gun to operate correctly, the needle, feed wheel, scissors, and presser foot must move in precise synchronization.

#터프팅 #터프팅건 #터프팅공방

21/09/2026

ZQ-III Tufting Air Gun Tutorial | Part 1

In Part 1, we briefly introduce the ZQ-III Tufting Air Gun. In Part 2, we take a closer look at its construction, key components, operating mechanism, and the essential points to check when it is not working properly.

#터프팅 #터프팅건 #터프팅공방

20/09/2026

Hand Tuft
2500 × 2300 mm
New Zealand Wool · 5 Colors
5mm Loop Pile / Hand Carving Finish

Urban Sophistication
STUDIO KISAE

18/09/2026

Hand Tuft

2500 × 2300 mm
New Zealand Wool · 5 Colors
5mm Loop Pile / Hand Carving Finish

18/09/2026

Hand Tuft
2500 × 2300 mm
New Zealand Wool · 5 Colors
5mm Loop Pile / Hand Carving Finish

Urban Sophistication
STUDIO KISAE

#터프팅 #카페트 #러그 #러그인테리어 #러그추천

17/09/2026

AI로 무한한 이미지를 만들 수 있는 시대
우리는 이미저 너머에 실제로 존재하는 것의 가치를 다시 생각해..

#터프팅 #카페트

Address

Jongno District

Telephone

+821030556991

Website

https://www.mook-studio.com/

Alerts

Be the first to know and let us send you an email when Mook studio posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.