Hey everyone! Just wanted to share a Tip for when Spraying our new doors.
Just cut a few pieces of scrap / overcut’s at around 10-15 inches depending on the Weight of the Doors. ( Solid or Hollow Core ) and cut one ☝🏽 side at a 45 Degree Angle 📐 and rest your 45 Degree cut on the Floor flush. Get the door to the right position and Fasten it with a 1 5/8” Coarse thread screw￼.
If you’re using a Masonite or hollow core door I suggest pilot in the whole first to prevent splitting. ￼