Just An Illusion

Just An Illusion Just An Illusion provides upgrades and accessories for Science Fiction models. Product lines include lighting accessories, accurized parts, decals.
(4)

Well this came in and will be doing a lightning kit for it soon.
10/28/2015

Well this came in and will be doing a lightning kit for it soon.

Moebius Cylon interior deluxe This kit includes floor back bulkhead side panels clear canopy and three sitting Clyon fig...
06/03/2014

Moebius Cylon interior deluxe
This kit includes floor back bulkhead side panels clear canopy and three sitting Clyon figures.
A section of the hull needs to be cut off to install the interior.

Moebius 1/32nd Cylon cockpit upgrade SummaryThis is a clear canopy with three resin figure Cylon to compliment the new M...
04/27/2014

Moebius 1/32nd Cylon cockpit upgrade

Summary
This is a clear canopy with three resin figure Cylon to compliment the new Moebius 1/32nd scale Raider model kit

Polar Lights Jupiter 2 landing gear wells
03/08/2014

Polar Lights Jupiter 2 landing gear wells

This replacement fusion projector includes two separate parts to replace the Polar Lights Jupiter 2 Model Kit's single c...
03/08/2014

This replacement fusion projector includes two separate parts to replace the Polar Lights Jupiter 2 Model Kit's single clear piece. The outer housing can be painted separately, eliminating hours of tedious masking.

- Includes resin projector housing and clear vacuformed insert.

- Suitable for lighting - electronic components not included.

Fantastic Voyage  Voyager light kit
03/07/2014

Fantastic Voyage Voyager light kit

Spindrift rear bulkhead wall
03/07/2014

Spindrift rear bulkhead wall

Spindrift Grill
03/07/2014

Spindrift Grill

Accurate egg-shaped replacement dome for the Aurora / Polar Lights Spindrift Model from Land of the Giants. Vacuum form ...
03/06/2014

Accurate egg-shaped replacement dome for the Aurora / Polar Lights Spindrift Model from Land of the Giants.

Vacuum form piece directly replaces the kit dome without modification.

Eagle 1This is an upgrade for the Eagle 1 model comes with four landing pads with metal struts.Cockpits insert with two ...
03/06/2014

Eagle 1

This is an upgrade for the Eagle 1 model comes with four landing pads with metal struts.
Cockpits insert with two figures an upper command module with open windows

350th Seaview light kit Now can have your 350th Seaview lit. This set has fiber optics embedded to the Cadillac fins and...
12/23/2013

350th Seaview light kit


Now can have your 350th Seaview lit. This set has fiber optics embedded to the Cadillac fins and two pre bent fiber optics for the sail. Also 3 pre-wire LED's one for the headlight second for the sail lights and the third for the fins. nine volt clip, switch, shrink tube included

Seaview Premium Lighting Kit[VTTBOTS    Seaview Basic Lighting Kit !!! Your 1/128 scale Moebius Seaview Model deserves t...
12/22/2013

Seaview Premium Lighting Kit
[VTTBOTS





Seaview Basic Lighting Kit !!!
Your 1/128 scale Moebius Seaview Model deserves the best so get the best from JAI !!!
As with all of our lighting kits, we not only list what comes in the kit but show you a photo of what you are buying
instead of just images of a finished model all lit up !!!
Kit includes:
Electroluminescent panel
Photo-etch panel
Decals

Complete interior / exterior lighting:

Eight LEDs;
(3) Three high intensity for the search lights - the search lights include brass tubing bezels to minimize light leaks;
(3) Three LEDs for the sail lighting;
(2) Two LEDs with fiber optic bundles for the rear "Cadillac" fins.
ALL LEDs include prewired resistors !!!

I like to thank John Ross on a beautiful build!

Seaview Premium Lighting Kit
[VTTBOTS





Seaview Basic Lighting Kit !!!
Your 1/128 scale Moebius Seaview Model deserves the best so get the best from JAI !!!
As with all of our lighting kits, we not only list what comes in the kit but show you a photo of what you are buying
instead of just images of a finished model all lit up !!!
Kit includes:
Electroluminescent panel
Photo-etch panel
Decals

Complete interior / exterior lighting:

Eight LEDs;
(3) Three high intensity for the search lights - the search lights include brass tubing bezels to minimize light leaks;
(3) Three LEDs for the sail lighting;
(2) Two LEDs with fiber optic bundles for the rear "Cadillac" fins.
ALL LEDs include prewired resistors !!!

I like to thank John Ross on a beautiful build!

FS Diorama[FS-DIO]	   Just An Illusion is proud to present our new offering for the Mini flying sub. This kit includes a...
12/22/2013

FS Diorama
[FS-DIO]





Just An Illusion is proud to present our new offering for the Mini flying sub.

This kit includes a small vacuum-form base simulating the craft coming out of the water. 2 LED's for the headlights an electroluminescent disc for overhead lighting. switch and battery clip.

What better way to show off the new interior!

• As with all of our lighting kits, we not only list what comes in the kit but show you a photo of what you are buying instead of just images of a finished model all lit up !!!

Seaview Eight Window light kit[JAISV8]	    This is for the Moebius Seaview eight window kit. Comes with interior lightin...
12/22/2013

Seaview Eight Window light kit
[JAISV8]





This is for the Moebius Seaview eight window kit. Comes with interior lighting search lights, fin and sail. Also to light up the plume for the Polaris missile. Comes with all the led's pre-wire, brass tube fiber optics battery clip and switch

This has been a popular for lighting the Moebius Frying Sub What I have is the floor panel and overhead lighting
12/19/2013

This has been a popular for lighting the Moebius Frying Sub What I have is the floor panel and overhead lighting

This has been a popular for lighting the Moebius Frying Sub What I have is the floor panel and overhead lighting

This is a lighting kit for the new Pilgrim observer model kit. The flat light is folded so it will light both sides of t...
11/26/2013

This is a lighting kit for the new Pilgrim observer model kit. The flat light is folded so it will light both sides of the crew quarters the Hydroponic farm and main control center. It will give a soft glow instead of hotspots that LED's can give. There will be some drilling for main control center and the arms might be glue on the open position for best effect but it can articulate Kit come with 3 EL Lamps 1 disc 2 strips inverter battery clip switch wire nuts plastic screw.

Orion Landing Gear
11/26/2013

Orion Landing Gear

Chariot Head lights (Lost In Space)
11/26/2013

Chariot Head lights (Lost In Space)

Galileo II
11/26/2013

Galileo II

This is from a customer of mine with one of my kit lighting this are pictures of the actual model from Moebius. This is ...
11/25/2013

This is from a customer of mine with one of my kit lighting this are pictures of the actual model from Moebius.
This is a lighting kit for the Moebius Moonbus. It can be glued or double sided tape can also be used. You have white lighting for the cabin and red film to enhance the cockpit like the movie. Kit includes Lamp inverter wire nuts switch and battery clip.

This is from a customer of mine with one of my kit lighting this are pictures of the actual model from Moebius.
This is a lighting kit for the Moebius Moonbus. It can be glued or double sided tape can also be used. You have white lighting for the cabin and red film to enhance the cockpit like the movie. Kit includes Lamp inverter wire nuts switch and battery clip.

Mark II Light kit   This is a light kit for the Moebius Mark II Viper kit. The kit includes a clear blue resin cans suit...
11/25/2013

Mark II Light kit






This is a light kit for the Moebius Mark II Viper kit. The kit includes a clear blue resin cans suitable for lighting 3 LED's 9 volt clip switch and wire nuts

Moebius MK1 Viper Light kit SummaryThis is for the Moebius Mark One engine lighting effect. Comes with 3 light boxes 3 L...
11/25/2013

Moebius MK1 Viper Light kit Summary
This is for the Moebius Mark One engine lighting effect. Comes with 3 light boxes 3 LED's 9 volt clip and switch

Viper Engine Lighting Kit - Original Release   Engine Lighting Solution for the Original Release Kit. Includes: - Clear,...
11/25/2013

Viper Engine Lighting Kit - Original Release






Engine Lighting Solution for the Original Release Kit. Includes:

- Clear, Blue Resin Engine Assembly
- 3 Reflector Domes — molded in black to eliminate light leaks
- 3 Prewired LEDs with Resistors
- 3 LED Panel Clips for easy installation
- 9 Volt Battery Connector Switch

• As with all of our lighting kits, we not only list what comes in the kit but show you a photo of what you are buying
instead of just images of a finished model all lit up !!!

A complete cockpit interior created for the Battlestar Galactica original series Cylon Raider model produced by Revell. ...
11/25/2013

A complete cockpit interior created for the Battlestar Galactica original series Cylon Raider model produced by Revell. This interior includes the seats, a vacuum formed canopy, and 3 metal Cylons!

So just polish the Cylons and go!!

Interplanetary U.F.O.
11/25/2013

Interplanetary U.F.O.

Well from the terminator movie comes the Hunter Killer machine.I have come out with a light kit for it to come out with ...
10/31/2013

Well from the terminator movie comes the Hunter Killer machine.

I have come out with a light kit for it to come out with a nice display!

Monogram Flying Sub Upgrade
09/28/2013

Monogram Flying Sub Upgrade

New for the this summer will be the Sealab 3 this will be a multi- media kit based on the old Aurora kit.
01/16/2013

New for the this summer will be the Sealab 3 this will be a multi- media kit based on the old Aurora kit.

This light kit is to complement the K-7 space station. It will light up all the beacons. The tip of the extension cones ...
11/18/2012

This light kit is to complement the K-7 space station. It will light up all the beacons. The tip of the extension cones and the end of extension saucers.
and will light up the sphere on the antenna.

Kit includes seven pre-cut fiber optics, one clear sphere,three fiber optic splits,one base tube, one antenna tube. four LED's wire nuts nine volt clip and switch. Like all of our kits no soldering is require.

Well I have been working on a lighting kit for the K-7 more this week.
11/15/2012

Well I have been working on a lighting kit for the K-7 more this week.

Just An Illusion's cover photo
04/22/2012

Just An Illusion's cover photo

Well I have finish with help from a good friend to finish an upgrade for the monogram flying sub. It should be in the we...
04/09/2012

Well I have finish with help from a good friend to finish an upgrade for the monogram flying sub. It should be in the web store in a few weeks

03/14/2012

I am working on doing some cars parts in resin and metal from 1/32to 1/16 I am working on masters now.

Timeline Photos
03/14/2012

Timeline Photos

Well I started casting the interiors for the Moebius Orion I am hoping to have it in the web store this week
02/20/2012

Well I started casting the interiors for the Moebius Orion I am hoping to have it in the web store this week

07/12/2011

Just starting out with this page by mentioning that we have resin tracks for the Chariot from Lost in space and will have pictures soon

Address

Stratford, CT
06615

Alerts

Be the first to know and let us send you an email when Just An Illusion posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Nearby home improvement businesses


Comments

This is going to look great with an oval dome!
Just received my Aurora (Monogram reissue) Flying Sub fusion core panel and 2001 Moon Bus flatlight kits. Boy, pictures truly don't do these items justice - they MAKE the models they're installed in. Thanks, Gil, for making these nifty items available.
JAI - I bought your interior lighting kit for the Moebius Moonbus a couple of years ago, and about a week ago I wired it up and got nothing. I left and email via your web page. Can you help me out on this, please? Thanks!