JARMO Carpentry

JARMO Carpentry Licensed Carpenter specialising in renovations, decks, pergolas, Colorbond roofing, flashings and general carpentry. Quality Workmanship. Reliable Service.

Lic No. 501550C | ABN 37 796 097 896

WEDNESDAY CARPENTRY TIP: A DAMAGED DOOR JAMB MAY NOT NEED FULL REPLACEMENTLocalised damage from impact, pets or failed f...
21/10/2026

WEDNESDAY CARPENTRY TIP: A DAMAGED DOOR JAMB MAY NOT NEED FULL REPLACEMENT

Localised damage from impact, pets or failed fixings can sometimes be repaired without removing the entire door frame.

The right approach depends on whether the damage is limited to the architrave or surface timber, or whether it has affected the jamb, hinges, latch area or structural fixing behind it.

A proper inspection will determine whether a local repair is suitable or a broader replacement is the better long-term option.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

PROJECT IN PROGRESS: PREPARING A GARDEN SHED BASEThis small shed project started by excavating the area so the supportin...
18/10/2026

PROJECT IN PROGRESS: PREPARING A GARDEN SHED BASE

This small shed project started by excavating the area so the supporting timber frame could sit level with the surrounding ground.

The H4 treated timber frame was cut and assembled, installed with star posts, levelled and used to secure the shed base ready for the remaining assembly.

It is the work underneath that gives the finished shed a reliable starting point.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

BEHIND JARMO: WHEN A PRODUCT ISSUE CHANGES THE PLANNot every delay on site comes from the building itself. Sometimes a p...
16/10/2026

BEHIND JARMO: WHEN A PRODUCT ISSUE CHANGES THE PLAN

Not every delay on site comes from the building itself. Sometimes a product arrives with packaging, protective film or assembly details that take far longer to manage than expected.

When that happens, the sensible approach is to stop, protect the materials and agree on the next step rather than rushing and damaging the finish.

Clear communication and a practical plan keep the job moving while protecting the client’s materials and the quality of the finished work.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

WEDNESDAY CARPENTRY TIP: A GOOD SHED STARTS WITH THE BASEBefore a garden shed goes together, the supporting base needs t...
14/10/2026

WEDNESDAY CARPENTRY TIP: A GOOD SHED STARTS WITH THE BASE

Before a garden shed goes together, the supporting base needs to be level, square and properly secured.

If the base is out, the wall panels can fight the fixings, door openings may not line up and the finished shed can rack or twist. Checking the diagonals, levels and fixing points early saves a lot of trouble later.

The right base depends on the shed, the site and the intended use, so it is worth sorting before assembly begins.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

SLOW IS SMOOTH. SMOOTH IS FAST.It is a saying I used daily when I was an instructor in the RAAF, and it applies just as ...
14/10/2026

SLOW IS SMOOTH. SMOOTH IS FAST.

It is a saying I used daily when I was an instructor in the RAAF, and it applies just as well to carpentry.

It does not mean dragging a job out. It means taking the time to understand the task, plan the sequence, check the measurements and prepare properly before committing.

Rushing the setup creates mistakes. Mistakes create rework — and rework costs more time than doing it properly in the first place.

That principle has followed me from the RAAF into JARMO Carpentry: prepare carefully, work methodically and get it right.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

To all the Fans out there, Knights, Roosters and all Rugby League pundits, Good Luck and may the best team win.JARMO Car...
04/10/2026

To all the Fans out there, Knights, Roosters and all Rugby League pundits, Good Luck and may the best team win.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

WEDNESDAY CARPENTRY TIP: DO NOT IGNORE DAMAGED TIMBER CLADDINGPeeling paint can be a maintenance issue, but cracked, sof...
30/09/2026

WEDNESDAY CARPENTRY TIP: DO NOT IGNORE DAMAGED TIMBER CLADDING

Peeling paint can be a maintenance issue, but cracked, soft or badly weathered cladding may indicate that moisture has reached the timber beneath the coating.

Warning signs worth checking include:

- Boards that feel soft or crumbly
- Splitting around joins and fixings
- Paint repeatedly lifting in the same area
- Gaps opening between boards or trims
- Water staining around windows and doors
- Damage concentrated near the bottom of walls

The visible board may not be the only issue, so damaged cladding should be inspected before deciding whether a local repair or broader replacement is appropriate.

If you are concerned about an area of timber cladding, send through clear photos, your suburb and a short description.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

NEED A CARPENTER? HERE'S WHAT TO SEND WITH YOUR ENQUIRYA few useful details can make it much easier to understand your j...
27/09/2026

NEED A CARPENTER? HERE'S WHAT TO SEND WITH YOUR ENQUIRY

A few useful details can make it much easier to understand your job and work out the next step.

When contacting JARMO Carpentry, please include:

- Your name and suburb
- A short description of the work
- A few clear photos from different angles
- Approximate measurements, if available
- Any important timing or access requirements
- Whether materials have already been purchased

Some jobs can be discussed from this information, while others will need a quick site inspection and measure-up before a price or approach can be confirmed.

JARMO Carpentry assists with repairs, maintenance, decks, pergolas, doors, windows, cladding and other general carpentry projects.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

HOURLY RATE OR FIXED PRICE — WHAT SUITS YOUR JOB?Not every carpentry job needs to be priced the same way.Hourly, minimum...
25/09/2026

HOURLY RATE OR FIXED PRICE — WHAT SUITS YOUR JOB?

Not every carpentry job needs to be priced the same way.

Hourly, minimum, half-day or day rates can suit smaller jobs where the work is straightforward but the exact time may vary. A fixed labour price is often better for larger jobs once the scope, materials and site conditions are clearly understood.

Whichever approach suits the job, the important part is agreeing on it before work begins and explaining what is included. If something unexpected is uncovered, I will discuss it with the client before carrying out additional work outside the agreed scope.

Have a job in mind? Send through the details and I can recommend the most sensible way to price it.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

WEDNESDAY CARPENTRY TIP: PROTECT FRESHLY CUT EXTERIOR TIMBERTreated timber is manufactured for outdoor use, but cutting ...
23/09/2026

WEDNESDAY CARPENTRY TIP: PROTECT FRESHLY CUT EXTERIOR TIMBER

Treated timber is manufactured for outdoor use, but cutting or drilling it can expose fresh timber that may need additional protection.

Applying a suitable timber preservative to cut ends, notches and drilled areas helps maintain protection where the original treatment envelope has been disturbed.

Good exterior timber work also considers:

- Keeping end grain away from standing water
- Allowing drainage and airflow
- Using fixings suited to the treatment and exposure
- Protecting horizontal framing surfaces where appropriate
- Following the timber supplier's installation requirements

It is a small step during construction that can help the finished work perform better over time.

JARMO Carpentry | Lic No. 501550C | 0402 442 318

Address

Oxley Cl, Raymond Terrace
Raymond Terrace, NSW
2324

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm
Saturday 7am - 5pm
Sunday 7am - 5pm

Website

Alerts

Be the first to know and let us send you an email when JARMO Carpentry posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category