What are the opening hours?

Monday 08:00 - 17:30 Tuesday 08:00 - 17:30 Wednesday 08:00 - 17:30 Thursday 08:00 - 17:30 Friday 08:00 - 17:30 Saturday 08:00 - 17:30

ALUN Wire Mesh, No. 60, Road Zhenggang, Raoyang County, Hengshui (2026)

04/10/2026

Need a 3D Curved Fence for a High-End Real Estate Project in Australia? Let's Talk Specs.

We usually end up talking specs before anyone talks price.

That's how it goes on a high-end residential development in Australia. The architect has a sightline in mind, the landscape plan already picked a colour, and someone on the developer side wants to know how the fence will look in year eight. Cheap panels don't survive that conversation.

Two models come up most often.

3D-2000 is the curved one. The vertical wires bend, so the panel reads as part of the landscape instead of a hard line. 358-1800 is the tight one, an anti-climb panel for the spots where you genuinely can't have footholds.

Both sit in our welded mesh fence range. Panel width runs 2000–3000 mm, height 630–3000 mm, wire diameter 3.0–6.0 mm, mesh opening 50 × 100 mm or 76.2 × 12.7 mm. Base material is low carbon steel wire plus galvanized steel pipe, finished with hot dipped galvanizing and then powder coating. That's the combination we build for a service life past 10 years.

Where most projects need us to move is the top of the sheet: size, wire diameter, mesh, colour, logo, surface treatment. All of it is open.

We make it ourselves. Anping Dengfeng Wire Mesh Products Co., Ltd. has been running out of Anping County, Hebei since 2008, on a 70,000 m² site with 80 people and 10 engineers. Annual output is 5,000,000 m², monthly capacity 420,000 m², and every order goes through 100% full inspection before it ships. The plant holds ISO 9001:2015 certification (CQM, cert no. 00224Q25311R0M, valid to 27 Aug 2027), and Australia is one of our regular export markets.

Support doesn't stop at the container either. Free CAD drawing before production, remote technical support while your crew is setting posts, and an on-site installation guide if they want one. MOQ is 1 set, lead time 15–30 days.

We also ran a 5,000 sq.m job across Germany, Australia and the UK for engineering contractors and a property developer, where the anti-rust and anti-climb performance has held over 10 years.

So — what lands on your spec sheet first, panel height or the finish colour?

Send over a drawing, or just the site dimensions, and we'll come back with a spec sheet. [email protected] / WhatsApp +86 158-3395-6854.

01/10/2026

What to Lock Down Before You Order Welded Mesh Fence

Someone asked us this on a quote thread last month: what are the actual purchasing terms and acceptance criteria for welded mesh fence? Good question, because most quotes stop at the price and leave the rest for you to guess.

Purchasing terms first, since they decide whether the order even moves. MOQ is 1 set. Lead time runs 15–30 days. Delivery is FOB Tianjin or CIF. Payment options include L/C, T/T, D/P, Western Union, PayPal and Money Gram. Monthly capacity sits at 420,000 m², so even a mixed panel order doesn't sit at the back of the queue.

Then the specs — and this is where "welded mesh fence" stops meaning anything useful. Confirm four things: model, size, wire, mesh. Models: 3D-2000, 358-1800, TW-1500, TC-2100. Height range 630–3000 mm. Width 2000–3000 mm. Wire diameter 3.0–6.0 mm. Mesh size 50×100 mm or 76.2×12.7 mm.

Material and finish next. The standard build is low carbon steel wire with galvanized steel pipe, hot dipped galvanized plus powder coated, and it's rated for over 10 years of service. If your site is coastal or chemical-heavy, ask which material route you're actually being quoted — carbon steel, aluminum alloy, or stainless steel 304/316 behave very differently, and that line belongs in writing, not in conversation.

Now acceptance criteria, the part that causes the most arguments at handover. Anping Dengfeng Wire Mesh Products Co., Ltd. is a wire mesh manufacturer based in Anping County, Hebei, China, running OEM/ODM production. Quality signals worth asking for: ISO 9001:2015 certification (certificate 00224Q25311R0M, issued by CQM), SGS and BV certification, 100% full inspection, and pre-shipment quality inspection. Third-party testing is acceptable as well. Panel geometry comes off robotic welding; polishing, pickling and powder coating are checked manually.

Last, after-sales. Remote technical support, on-site installation guidance, free CAD drawings. Customization covers size, wire diameter, mesh, color, logo and surface treatment.

Which do you check first — the acceptance criteria or the after-sales terms?

28/09/2026

Cracked Welds and Rust Freight: Why Cheap Fencing Costs You More

Cheap perimeter fencing rarely fails all at once.

It goes quietly. A hairline crack at a weld. A brown streak running down a post after the first wet season. The panel is still standing, so nobody flags it — until a section sags, or someone walks the site and asks when the fence was last checked.

Then comes the invoice nobody budgeted for. Repair crew, replacement panels, freight, site access again. And a couple of years later, the same scene repeats.

Here's what's actually happening. On a low-cost welded mesh fence panel, the coating is usually the first thing cut. Thin electro-galvanizing, or a single powder coat sprayed straight over bare steel. Weld points are where the coating sits thinnest and where moisture pools first — so that's where corrosion starts, working outward from inside the wire.

Dengfeng builds the welded mesh fence the other way around. Panels are made from national-standard low carbon steel wire and galvanized steel pipe, then hot-dipped galvanized and powder coated. Low carbon steel wire gives the panel its tensile strength; the galvanized steel pipe handles support and structure. Together with the two-layer finish, that's the reason the stated service life is over 10 years.

If you're writing a spec, the numbers are: heights 630 mm to 3000 mm, widths 2000 mm to 3000 mm, wire diameter 3.0 mm to 6.0 mm, mesh sizes 50×100 mm and 76.2×12.7 mm. Model designations include 3D-2000, 358-1800, TW-1500 and TC-2100. Welding is completed by robotic welding, and every order goes through 100% full inspection covering the pickling, polishing and powder coating stages.

When a project is checked against EN 10223-7:2012 or ASTM F2453 for welded panels, what gets reviewed is the material and coating route — not the colour card. Anping Dengfeng Wire Mesh Products Co., Ltd. holds an ISO 9001:2015 Quality Management System certificate (No. 00224Q25311R0M, issued by CQM, valid for the global market).

Size, wire diameter, mesh, colour, logo and surface treatment can all be customized to your drawing. MOQ starts at 1 set, with 15–30 day lead times.

So when a fence fails early on one of your sites — what shows up first, cracked welds, or rust creeping up from the base plate?

25/09/2026

3D-2000 Panels: 10 Years, Barely Any Maintenance

Anyone managing a residential community knows the fence is invisible — until it isn't.

Year one, nobody looks at it. Year four, there's rust weeping down the posts by the sprinkler line, one panel leaning where a delivery truck clipped it, and a back corner that's become a little too easy to climb.

That's usually when someone asks a simple question: which welded mesh fence actually holds up?

The honest answer is that the coating on top matters less than what sits underneath it. The 3D-2000 welded mesh fence from Dengfeng starts with low carbon steel wire and galvanized steel pipe, then gets hot-dip galvanized and powder coated — two protective layers, not one. Panels are welded by robotic machines, so the mesh intersections stay consistent from panel to panel, and every batch is checked by hand through polishing, pickling and the powder coating line before it leaves the factory.

What that looks like in practice, if you're specifying a boundary this year:

Height: 630 mm to 3000 mm
Width: 2000 mm to 3000 mm
Wire diameter: 3.0 mm to 6.0 mm
Mesh: 50×100 mm or 76.2×12.7 mm
3D curved rigid frame panels — the bend is what makes them awkward to grip, which is why this profile keeps showing up on residential perimeters and anti-climb applications
Rated service life: over 10 years
Certifications: ISO9001, SGS and BV

Roughly 5,000 m² of these panels are already installed across sites in Germany, Australia and the UK, mostly on site boundary isolation and community security enclosure work — the kind of run where a development gets handed over in phases and the perimeter has to look the same in phase three as it did in phase one.

What matters to contractors, real estate developers and security wholesalers isn't really the year-one price. It's whether the same spec is still available when a phase suddenly needs another 40 panels. Dengfeng cuts panels to customer drawings instead of a fixed catalogue, and 80% of sales go to export markets including Europe, Saudi Arabia, the Middle East, the UAE and the US. Every order ships after pre-shipment inspection.

So — on the community boundaries you've worked on, what goes first: the coating, the posts, or the gate? Genuinely curious which one your maintenance team grumbles about most.

Pricing a perimeter and want panel sizes matched to your drawings? [email protected] / +86 158-3395-6854

22/09/2026

5,000 m² of Welded Mesh Fence, Three Countries, One Spec

One 5,000 m² welded mesh fence order. Three countries on the delivery list: Germany, Australia and the UK. All of it going up as site boundary isolation and community security enclosure.

The buyers weren't one company either — an engineering contractor, a real estate developer and a security wholesaler all after the same thing. A boundary that stands there and does its job, 24/7, outdoors.

Community boundaries don't get a day off. Frost, coastal air, summer UV, and the occasional person who'd rather climb over than walk around. Whatever goes in has to survive all of that, season after season.

Which is where the spec matters more than the product photo.

For that kind of job, two models usually do the heavy lifting. The 3D-2000 runs a 50×100 mm mesh on a curved panel profile — a good fit for community edges where the boundary should read tidy rather than institutional. The 358-1800 goes the other way: 76.2×12.7 mm apertures, no foothold, nothing to grip. Anti-climb is built into the geometry, not bolted on afterwards.

Heights span 630 mm to 3000 mm, so a low garden boundary and a full-height perimeter run come off the same range. Panel widths sit between 2000 and 3000 mm, wire diameter 3.0 to 6.0 mm.

Material is low carbon steel wire and galvanized steel pipe — hot dipped galvanized first, powder coated after. That two-layer finish is what holds corrosion and rust back outdoors, and it's how the panels reach a service life of over 10 years. Certificates on file: ISO9001, SGS, BV. And every order goes through 100% full inspection before shipping.

We're Dengfeng — Anping Dengfeng Wire Mesh Products Co., Ltd., a wire mesh manufacturer based in Anping County, China, producing welded mesh fence and perimeter products since 2008.

On site it comes down to rigid frame panels, support posts, connecting clips and a security gate where the layout calls for one. Sizes are fully customizable, which is why a German community edge, an Australian block and a UK boundary can share one spec instead of squeezing into a stock panel. Typical lead time: 15–30 days.

European projects may also want EN 10223-7 on the checklist — that's the standard covering steel wire welded panels for fencing.

So, site managers and installers: when a community fence fails early, what goes first — the coating around the post line, or the panel itself?

19/09/2026

Site Managers: Is Your Welded Mesh Fence ISO 9001 Certified?

Quick one for site managers and contractors: when the fence panels land on site, who actually checks the paperwork behind them?

Here’s how it usually goes. A supplier replies “yes, certified” in a chat. The panels go up, the crew moves on. Months later the developer asks for quality documents before handover, and someone is digging through old email threads.

So here’s the part worth knowing, because it changes how you read any certificate that lands in your inbox.

ISO 9001 is not a product test. It’s a management system certificate — it says the factory runs a documented, audited quality process. Product performance is a separate question, covered by standards such as EN 10223-7:2012 for steel wire welded panels, or ASTM F2453 for coated fence fabric in high-security use. SGS and BV reports are the third piece: independent third-party inspection of actual samples.

You want all three. And you want them to match the name on the quotation.

Anping Dengfeng Wire Mesh Products Co., Ltd. (Dengfeng) is a welded mesh manufacturer based in Anping County, Hebei, China, working out of a 70,000 m² factory. Its welded mesh fence panels carry ISO 9001, SGS and BV documentation, with a stated service life over 10 years. That last figure isn’t a certificate line. It comes from hot-dip galvanizing plus powder coating on a thickened wire structure, backed by 100% raw material inspection, a load test on finished panels, and a full check before delivery.

The same documents matter whether the panels end up around a school, a rail corridor or an industrial perimeter.

The honest trade-off: coated welded mesh fence panels cost a little more upfront than bare or thin-coated ones. That small gap is what keeps anti-climb and anti-corrosion performance steady through the years you would otherwise spend touching up rust and swapping panels.

Next time a quotation arrives, ask for three things: the ISO 9001 certificate with the manufacturer’s name and scope visible, a third-party test report tied to the actual spec, and the coating spec in writing. If a supplier can’t send all three the same day, you already have your answer.

Do you keep a certification checklist for fence suppliers, or does it only come up when the developer asks?

16/09/2026

Welded Mesh Fence Inquiry: What Gets You a Fast Quote

"Send me your best price for welded mesh fence."

That message lands in a lot of inboxes every week. And most of the time it comes back with another question instead of a number. Not because suppliers are being difficult — because welded mesh fence covers everything from a 630 mm garden panel to a 3,000 mm anti-climb run, and the price moves a lot depending on which one you actually need.

So here's how to skip the back-and-forth.

Start with the model family. Dengfeng (Anping Dengfeng Wire Mesh Products Co., Ltd., a welded mesh fence manufacturer based in Anping County, Hebei) builds four that cover most security jobs:

3D-2000 — curved 3D panels, the usual pick for schools, parks and sports fields
358-1800 — small-aperture anti-climb, anti-cut panel for railways and industrial perimeter work
TW-1500 — double wire panels, rigid and hard to bend, suited to residential boundaries
TC-2100 — temporary construction fencing that goes up and comes back down

Then add the numbers. Across these models the standard range runs 630 mm to 3,000 mm high, 2,000 mm to 3,000 mm wide, wire diameter 3.0 mm to 6.0 mm. Mesh is usually 50×100 mm or 76.2×12.7 mm. Give us height, width, wire, mesh and post spacing and the quote comes back fast. No drawing yet? A site photo works too — that's what the free CAD drawing is for.

Material and finish matter as much as size. These panels use low carbon steel wire and galvanized steel pipe, hot dipped galvanized and then powder coated. That's the combination behind the 10+ year service life, and the reason maintenance stays low instead of turning into a repaint cycle every few years.

Customization is where most projects actually land: size, wire diameter, mesh, color, logo, surface treatment — OEM/ODM is standard here. MOQ is 1 set, so a single panel for sampling or a repair is no problem, and lead time runs 15–30 days. Monthly capacity sits at 420,000 m² if you're planning a phased rollout, and every order goes through 100% full inspection before it ships. Paperwork includes ISO 9001:2015 (certificate 00224Q25311R0M, issued by CQM), plus SGS and BV.

Pricing a project right now? Send the site type, dimensions and quantity to [email protected].

Curious — when you send a fence inquiry, do you lead with the drawing or with the budget?

13/09/2026

Robotic Welding Is Why Welded Mesh Fence Panels Match

Two welded mesh fence panels can look identical and still not be.

The weld is where a fence quietly keeps or loses its strength, and it's the one thing a spec sheet almost never mentions. Hand welding is a skill, and skills vary. Across a long shift the rhythm changes — a joint gets a slightly shorter hold, a little less pressure, or a wire shifts a fraction and nobody notices. None of that shows up in a photo. It shows up two winters later, when one panel starts to sag or a wire pulls free at the joint.

That's the risk hiding behind a clean-looking sample.

Dengfeng welds panels on automated lines instead. Anping Dengfeng Wire Mesh Products Co., Ltd. is a wire mesh manufacturer based in Anping County, Hebei, China, exporting welded mesh fence and related security fencing to Europe, the Middle East and North America. On the automated line the welding head makes the same pass, at the same current and speed, at every intersection on the panel — first joint to last, panel one to panel five hundred. It doesn't depend on how tired anyone is at 4 pm.

What that buys you is boring, and valuable: mesh openings hold at 50×100 mm, wire diameter stays inside the 3.0–6.0 mm range you ordered, and each joint behaves like the one beside it. Uniform strength means a panel ordered this month still matches a panel ordered next year.

Material does its part. Welded mesh fence from Dengfeng is made from low carbon steel wire, hot dipped galvanized and then powder coated. Low carbon steel bends and recovers instead of snapping at the weld — which matters on a school boundary, a railway corridor, or an industrial perimeter where someone eventually leans on it. On projects in Germany, Australia and the UK, these panels have stayed in service past ten years.

Three questions are worth more than any brochure before you commit: how are the joints welded, what wire diameter range is actually used, and does the factory inspect every panel or just a sample? At Dengfeng, quality control is 100% full inspection before shipment, independent third-party testing is accepted, and ISO 9001:2015 certification (certificate 00224Q25311R0M) covers welded fence production. On an EU project, EN 10223-7:2012 is the standard worth naming in your enquiry.

Consistency isn't exciting. It's just the difference between a perimeter that behaves as one fence and a pile of panels that each behave differently.

Ever replaced a single welded mesh fence panel years later and found it didn't quite match the rest?

10/09/2026

Welded Mesh Fence That Stops the Rust-and-Replace Cycle

Two winters is often all it takes. You walk the boundary, and there it is — orange streaks along the bottom rail, coating lifting around the post bases, and a mesh panel that no longer taps back the way it did on delivery day.

If you manage a construction site, a housing development or an industrial yard, you know the pattern. Year one looks fine. Year two, the finish starts failing at the joints. By year three you're collecting replacement quotes, and the fence you budgeted as a one-time cost has quietly become a recurring line item.

The annoying part? It's rarely the steel. It's the coating.

Panels that fail early usually fall into two groups. Either the wire was only lightly coated, so cut ends and weld points are the first places to corrode, or the welding was uneven, leaving small gaps where water sits and works its way in. Neither problem shows up at delivery. Both show up when the weather does.

Dengfeng builds welded mesh fence panels with a two-layer finish: hot-dipped galvanizing as the corrosion barrier, then powder coating over the top for UV and impact resistance. Welding is done by robotic welders, and panels move through polishing, pickling and coating with manual inspection at each stage — which is why the finish stays consistent across a run instead of varying from panel to panel. That's the combination that pushes service life past 10 years.

If you're comparing quotes, these are the numbers worth lining up side by side:

• Height range: 630 mm – 3000 mm
• Width range: 2000 mm – 3000 mm
• Wire diameter: 3.0 mm – 6.0 mm
• Mesh sizes: 50×100 mm and 76.2×12.7 mm
• Model designations: 3D-2000, 358-1800, TW-1500, TC-2100

The welded mesh fence product also carries ISO 9001:2015 certification (certificate number 00224Q25311R0M), issued by CQM under GB/T 19001-2016 / ISO 9001:2015 and valid for the global market. Depending on where your site is, your spec may reference EN 10223-7:2012 for steel wire welded panels used in schools, parks and industrial sites, or ASTM F2453 / F2453M for welded wire mesh fabric with metallic or polymer coatings in high-security applications. Worth checking which one your reviewer will ask about before you order.

What it comes down to on site: less time chasing repair crews, fewer repeat orders, and a boundary that still holds its finish when the panels next to it have already been swapped out once.

Anping Dengfeng Wire Mesh Products Co., Ltd. has been manufacturing wire mesh in Anping County, Hebei since 2008, with around 80% of output going to Europe, the Middle East and North America. Panel size, wire diameter, mesh and colours can all be customized, and CAD drawings come free.

So — how long did your last perimeter fence actually hold up before the first rust showed? Three years, five, or did it make it to ten?

If you're pricing panels for an upcoming boundary, email [email protected] with your height, mesh size and finish requirements, and we'll match the spec to the site rather than the catalogue.

07/09/2026

Welded Mesh Fence for a 5,000m² German Construction Site

An empty 5,000 m² plot in Germany can look quiet — until equipment, materials and curious visitors start to test the perimeter.

A construction site fence works 24/7. It separates the site, blocks climbing attempts and has to stay reliable through changing weather. That is a bigger job than it looks.

**Why welded mesh fence fits this job**

Anping Dengfeng Wire Mesh Products Co., Ltd. — a wire mesh manufacturer founded in 2008 in Anping County, China’s “Hometown of Wire Mesh” — builds welded mesh fences for this type of boundary duty.

Dengfeng’s welded mesh fence is made from low-carbon steel wire and galvanized steel pipe. The main model designations include 3D-2000, 358-1800, TW-1500 and TC-2100, covering 3D curved fence, 358 anti-climb fence, double wire fence, palisade fence, temporary construction fence and chain link fence styles.

The panel range fits real project layouts: height from 630 mm to 3000 mm, width from 2000 mm to 3000 mm, wire diameter from 3.0 mm to 6.0 mm, and mesh sizes including 50×100 mm and 76.2×12.7 mm.

For a 5,000 m² site, the fence becomes a real perimeter when support posts, connecting clips, security gates and razor wire are added. Together they deliver isolation, anti-climb protection and site separation — not just a visual line.

**Long-term anti-rust performance**

Site perimeters sit through all kinds of weather. That’s why surface finish matters. Hot-dip galvanizing plus powder coating gives the Dengfeng welded mesh fence long-term anti-rust and weather-resistant properties. The specified service life is over 10 years, and the product carries ISO9001, SGS and BV certification.

**European export experience**

Europe is one of Dengfeng’s main markets, and export business accounts for 80% of total sales. Every order also goes through pre-shipment quality inspection, so the panels arriving on a German project site are checked before delivery.

A well-planned perimeter doesn’t need to be complicated. The right welded mesh fence isolates the site, resists the weather and stays strong through the whole construction phase.

What is the biggest boundary challenge you have faced on a construction project? Tell us in the comments.

ALUN Wire Mesh

04/10/2026

01/10/2026

28/09/2026

25/09/2026

22/09/2026

19/09/2026

16/09/2026

13/09/2026

10/09/2026

07/09/2026

Address

Opening Hours

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Listing takedown request

Monday	08:00 - 17:30
Tuesday	08:00 - 17:30
Wednesday	08:00 - 17:30
Thursday	08:00 - 17:30
Friday	08:00 - 17:30
Saturday	08:00 - 17:30