What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

Candle Tubes UK

Home
United Kingdom
Peterborough
Candle Tubes UK

Candle Tubes for all your Bespoke Replacements and Restoration for Lamps, Lights and Chandeliers

13/11/2026

A lit Candle Tube also writes on the surface beneath the fitting.

Stand under a chandelier and look down as well as up: the lamp throws a pool of light onto the table, floor or sideboard below, and the Candle Tube sits at the top of that pattern. Around the base of the tube the lamp spills light downward, so the tube's base opening, taper and finish shape what lands below. A translucent Glass or Card tube glows along its own length and adds to the pool; a Metal or dark-finished tube holds the light back and lets the fitting's arms and candle points do the work; a Dripped or Waxed relief catches the downward light along its edge where a Plain finish lets it pass.

What this changes in practice: view the fitting lit at the level the room uses in the evening, and look at the surface below it from where people actually sit and stand. Note how far the downward pool reaches and where the tube's own silhouette falls inside it. Check how the material reads from below: where Glass or Card adds its own glow to the pool and where an opaque finish keeps the light in the lamp. Where the fitting hangs above a polished table or a pale floor, the surface returns the pattern a second time, so weigh that view alongside the others. Where the tube is specified for a fitting above a dining table or an entrance floor, record what the downward light shows with the fitting's records, so a later replacement is matched to the whole effect and not only to the tube in the hand.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

12/11/2026

A lit Candle Tube is also read on the ceiling above it.

Every chandelier and wall light sends part of its light upward, and the Candle Tube sits in the middle of that pattern. Around the top of the tube, the lamp throws a ring, a pool or a halo onto the ceiling, and the tube's own shape can appear inside it: a pale tube carries that light differently from a dark one, a translucent Glass or Card tube lets light through its own surface, and a relief profile such as Dripped or Waxed can pattern the ceiling light in a way a Plain finish does not. None of this is written on the tube itself. It only exists with the fitting lit, on the surface above it, and it is part of what the room actually sees.

What this changes in practice: look up as well as across, with the lights set at the level the room uses in the evening. Note the shape and reach of the uplight, and whether the tube reads as a silhouette inside it or disappears against it. Check how the material reads in that light: where Glass or Card lets the lamp's glow through the tube's own wall, and where a Metal or dark-finished tube holds it back, the ceiling shows the difference plainly. Note how a Dripped or Waxed profile patterns the projection differently from a Plain one. Look at the ceiling surface itself, since a pale ceiling displays the pattern most clearly and a dark ceiling returns very little. Where the ceiling is a visible part of the room, as it is in most hospitality and period interiors, weigh that view alongside the view of the fitting itself before the specification is agreed, and record what the ceiling shows with the fitting's records so a later replacement is matched to the whole effect and not only to the tube in the hand.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

11/11/2026

The fitting a guest sees first is judged before their eyes have settled.

The entrance hall, the porch light, the chandelier in the lobby: these fittings are seen at the moment of arrival, when the viewer is still adapting. Someone stepping in from a dark street, or from bright daylight into a shaded hall, carries a visual state that takes a minute or more to adjust. In the first seconds, lit filaments dominate, surface detail is least visible, and a Candle Tube reads as brightness and silhouette rather than finish and profile. A Dripped or Waxed texture that was matched carefully in good light may, for those first seconds, read simply as a dark shape behind a bright lamp, and then, once the eye has adapted, present itself differently again.

What this changes in practice: view the fitting in the arrival sequence, from the approach and the doorway, with the lights set as they would be on an ordinary evening, rather than only from inside the room in full light. Check the tube twice: once in the first seconds of entry, and again after a minute, because the two readings are not the same. Note what the viewer actually sees first (the lamp, the profile or the finish) and whether the top opening or the base flare leads the eye at that distance and angle. Where the hall or lobby fitting is the property's first impression, as it is in much hospitality work, weigh that arrival view alongside the seated and standing views in the room before the specification is agreed. Record the agreed evening condition with the fitting's records, so a later replacement is matched to what the fitting looks like in use and not only to a daytime photograph.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

10/11/2026

A redecoration usually changes everything in a room except the fitting that stays on the ceiling.

When a room is repainted around a live fitting, the chandelier or wall light is often left in place: masked with sheeting rather than taken down, because taking it down costs access time the programme does not have. The Candle Tube then spends the whole project inside the works zone. Paint mist settles on every surface and finds the relief of a Dripped or Waxed profile where it would run off a Plain one. Plaster and sanding dust sit in the same places. Dust sheets brush against the tube every time the room is worked in, and masking tape applied anywhere near the finish can lift or mark it when it comes away.

What this changes in practice: agree before the decorators start whether the fitting comes down or is masked in place, because that decision shapes what the tube is exposed to. If it stays up, cover it fully rather than partially, and keep sheets clear of the finish rather than pressed against it. Note that paint mist and dust settle into relief profiles differently from plain ones, so check the tube closely after the works, lit at the level the room uses, before anything else is specified against it. Photograph the fitting before the masking goes up and again after the sheets come down, and keep both with the fitting's records, so any change in the finish is judged against what it looked like on the day the decorators arrived. Where a tube has taken residue that cleaning cannot safely remove, that is a replacement conversation worth having while the access is still arranged rather than after the scaffolding has gone.

Where the fitting's electrical or mechanical parts need assessment during the works, that should be carried out by a qualified person.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

09/11/2026

A gasolier does not begin life as a candle fitting, and its Candle Tubes should not be specified as if it did.

Gas-to-electric conversions are a common stage in the life of a period fitting: a chandelier or wall light originally carried on gas pipework, with argand or fishtail burners, is later adapted to electric lampholders. The fitting's arms, collars and valve positions were shaped for the gas era, not for a modern lamp assembly, so the Candle Tube added at conversion often has to bridge two generations of hardware.

What that changes in practice: where burners were removed, the new lampholder may sit at a different height and on a different seating than the original flame position, so the tube's exposed length and the seating datum deserve checking against the converted arm rather than against the gas-era appearance. Where a gas c**k, key plate or escutcheon survives on the arm, note whether the tube or lampholder assembly will stand clear of it or dress against it, because that junction is read at close range on most fittings. Where conversion hardware differs from arm to arm, check each arm individually rather than assuming one specification fits the set, and hold the tube against every seating position, lit, before the specification is agreed. Record the conversion details with the fitting's records, so a later replacement is specified for the converted fitting and not for the gas-era original.

Where the conversion's electrical or mechanical parts need assessment or adjustment, that work should be carried out by a qualified person.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

08/11/2026

An increasing share of Candle Tube decisions now pass through a screen.

A photograph or a video call is often how a finish approval, a progress check or a replacement question is handled: the restorer sends the fitting to the designer, the designer reviews it on a phone or laptop, and the specification moves forward from that image. But a screen is not the room. A phone camera adjusts its white balance on its own, the display shifts the colour again, and compression flattens the surface detail a finish depends on. A Dripped profile that reads richly in the room can arrive flat and pale on a screen, or read warmer and deeper than it will ever look in place, and neither view is the tube's fault.

What this changes in practice: treat the screen view as a working check, not the final judge. Photograph the tube in even, single-source light rather than mixed lamplight and window daylight, include a neutral reference in the frame where one is available, and keep the lighting and the camera position consistent across every image in a comparison. Agree the direction on the screen, then confirm the finish against the part itself, in the room, lit at the level the fitting will actually use, before the specification is finalised. Where a new tube is being compared against aged originals, hold that comparison in person as well as on screen, because the qualities a screen loses most easily, sheen, surface texture and the depth of a finish, are the ones the eye reads first in the room. Keep the agreed images with the fitting's records, so the later stages of the project are judged against the same reference.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

07/11/2026

A fitting dressed for the season reads differently from the same fitting on an ordinary day.

Over the festive weeks, a chandelier or table fitting often carries more than its usual load: a foliage swag wired around the arms, baubles hung from the frame, garlands and ribbons, and extra Candles set out on the table below. The Candle Tube is still there doing its work, but the eye now reads it through the dressing: partly hidden behind foliage, crossed by a ribbon, framed by baubles, and seen against greenery rather than the wall or ceiling it was specified against. A profile that reads clean on an undecorated fitting can read crowded or blunted once the dressing goes up, and a finish chosen to hold its own against the room's colours can read differently against seasonal green and gold.

What this changes in practice: dress the fitting first and assess the tube through the dressing, lit at the level the room will use in the evening, before the specification is agreed. Note where the dressing crosses or covers the tube and how much of the profile still reads. Check whether the decoration changes the backdrop the finish is read against, and whether anything hung close to the fitting will make later inspection or replacement harder. Where a tube is due for renewal, do the check before the dressing goes up as well as after, so the specification is agreed for the fitting and not only for its seasonal presentation. Keep photographs of the dressed and undressed fitting with the fitting's records, so a later replacement can be specified against both.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

06/11/2026

A table lamp is the one fitting that rarely stays in the room it was specified for.

A portable lamp is carried from the hall to the living room, moved to a bedroom for a fortnight, set on a side table for the winter and back on the desk in the new year. The Candle Tube on it was specified against one backdrop, one light source and one set of neighbouring fittings, yet it now serves several: a different wall colour behind it in each room, a different bulb or level in use, a different shade of daylight at the window, and different fittings standing nearby to compare it against.

What reads as a well-matched Dripped finish against a warm hall wall can read cooler against a pale bedroom, and a height that sits comfortably beside one chair can look short on a taller table elsewhere. None of this is a fault of the tube; it is the fitting travelling beyond the view it was specified from.

Practical guidance: make a note of every room the lamp actually serves, and look at the tube in each of them, lit at the level each room uses. Decide which position is the fitting's main home and hold that as the datum the specification is agreed to, then check the secondary rooms against it rather than treating each as an equal brief. Note how the finish reads against each wall's colour, and where the lamp stands near other fittings, whether the tube holds its own beside them. If one room is clearly a poor match, it may be worth a second tube for that position rather than one compromise for all.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

05/11/2026

The higher a fitting hangs, the more of it the eye reads from below.

A chandelier over a staircase well, a lobby atrium, a hall with a long stairway rising beside it, or a fitting hung for a double-height room sits above the sightline of almost everyone who sees it. From that angle a Candle Tube is no longer read as a profile but as a shape: the opening at the top, the slight flare of the base, the taper as it narrows, and the space between tube and lamp all become visible at once. A tube that reads perfectly in a photograph taken face on can read differently from a staircase, where the view is partly along its length and partly across its width.

What this changes in practice: judge the fitting from below at the height people will actually pass beneath it, not from a level or frontal view. Check how much of the tube reads as opening rather than profile, since that balance shifts with every step of the staircase. Where a fitting is visible from a range of rising positions, check it from several rather than one, and note the angles where the tube appears shortest or widest. A Dripped or directional finish is particularly affected, because from below the eye reads the pattern against the light rather than across it.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

04/11/2026

A lit Candle Tube is often seen from outside the room it stands in.

Through a bay window, a shopfront, a pub's street-facing glass or a hotel lobby's doors, the fittings inside read as a night-time display, and the Candle Tube is one of the few components still identifiable from across the street. From the pavement, a fitting may be seen against the dark of the ceiling, framed by a curtain edge or a blind, cut across by a window bar, or glimpsed at an angle that shows the tube end-on rather than in profile. What the passer-by sees and what the occupant sees are rarely the same view, yet both are real views of the same specification.

This matters for hospitality, retail and period residential fittings in particular, where the window wall is effectively the fitting's second audience. A tube chosen only from the armchair across the room can read differently from the street: brighter against the dark, shorter where a window bar crosses it, or blunter in profile where it is seen nearly end-on. Glare and reflection in the glass add their own layer, doubling or obscuring the fitting in the same way a mirror does indoors.

Practical guidance: view the fitting at night from the positions outside it that matter, whether the pavement, the garden or the approach drive; note what actually shows, and what the window bars, blinds and curtains cut away; check the tube in profile and end-on, lit at its intended level; and where the window is the fitting's main public face, weigh that outside view alongside the interior one before the specification is agreed.

This is specification guidance, not a compatibility guarantee.

Penny's Daily Blog covers the visible detail behind Candle Tube specification for interior designers, professional restorers, lighting manufacturers and homeowners.

www.candletubes.co.uk
[email protected]

E10/E14 Candle components are not UL listed and brackets are earthed.

Candle Tubes UK - High-quality ranges for bespoke, custom-made Candle Tubes, also known as Candle Sleeves and Covers. Perfect for all new projects and restorations on Chandeliers and Lighting.

Address

Peterborough
PE86XW

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Website

http://www.candletubes.co.uk/

Alerts

Be the first to know and let us send you an email when Candle Tubes UK posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.