MANUFACTURA

MANUFACTURA A multidisciplinary studio using digital and analog fabrication to meet a sustainable built future.

12/10/2026

MANUFACTURA presented by .mo.z at our alma mater, 🥹🦾

We were honored to be part of the pitch presentations at the ETH Startup Architecture Symposium 2026. Thank you, , for the invitation and for bringing together startups working at the intersection of architecture, technology, and innovation!

From México to Switzerland 🇲🇽🇨🇭
Where it all began…

•
architecture manufacturamx

02/10/2026

Del cafetal a la luz 💡☕️
Abrimos este nuevo mes presentándoles una nueva colaboración que desarrollamos junto con 2 ENE y .

Un proyecto que responde a nuestro territorio en , Ciudad de México, a partir de uno de los residuos más abundantes de la fábrica: la borra de café de ☕️. A través de la impresión 3D robótica, transformamos este residuo en un nuevo material para crear una pieza de iluminación, explorando cómo los residuos de nuestro territorio pueden convertirse en nuevas materialidades y formar parte de una economía circular. ♻️
¡Gracias por la donación de desecho!

Este proyecto será presentado en INÉDITO Design Week México 2026, en , a partir del 10.10.26.
¡Los esperamos! 🔜

Créditos
Diseño: 2 ENE + MANUFACTURA
Diseño computacional: Edurne Morales Z.
Colaboradores: Evelyn Zogbi, Valeria Aparicio, René Velázquez, Ana Sofía Flores y Liz Medina
Investigación material: MANUFACTURA + Maria José Creuheras
Donación de material: BUNA
Fotografía: Dinorah Martínez Schulte
Fecha: 2026
Ubicación: Ciudad de México, México

•
hashtag hashtag hashtag hashtag hashtag

02/10/2026

Del cafetal a la luz 💡☕️
Abrimos este nuevo mes presentándoles una nueva colaboración que desarrollamos junto con .studio y .

Un proyecto que responde a nuestro territorio en , Ciudad de México, a partir de uno de los residuos más abundantes de la fábrica: la borra de café de ☕️. A través de la impresión 3D robótica, transformamos este residuo en un nuevo material para crear una pieza de iluminación, explorando cómo los residuos de nuestro territorio pueden convertirse en nuevas materialidades y formar parte de una economía circular. ♻️
¡Gracias por la donación de desecho!

Este proyecto será presentado en INÉDITO 2026, en , a partir del 10.10.26.
¡Los esperamos! 🔜

Créditos
Diseño: .studio +
Diseño computacional: .mo.z
Colaboradores: Evelyn Zogbi, Valeria Aparicio, René Velázquez, Ana Sofía Flores y Liz Medina
Investigación material: +
Donación de material:
Fotografía:
Fecha: 2026
Ubicación: Ciudad de México, México

•

🚀 This week, MANUFACTURA will be pitching at Startup Architecture: Big Ideas for the Physical World, hosted by Departmen...
22/09/2026

🚀 This week, MANUFACTURA will be pitching at Startup Architecture: Big Ideas for the Physical World, hosted by Department of Architecture (D-ARCH) ETH Zürich

We’re excited to share our work and vision on humanizing technology through material innovation, digital fabrication, and circular practices. Thank you Digital Building Technologies, ETH Zurich for the invitation!

Representing MANUFACTURA from Zürich, Switzerland, our co-founder Edurne Morales will be joining the event on our behalf. 🇨🇭

Excited to bring what we’re building in Mexico into an international conversation on the future of architecture and technology. 🇲🇽

More info: https://startups.arch.ethz.ch/

We are delighted to share that MANUFACTURA has been selected as an ArchDaily Next Practice 2026 by ArchDaily ✨💙While the...
15/09/2026

We are delighted to share that MANUFACTURA has been selected as an ArchDaily Next Practice 2026 by ArchDaily ✨💙

While the 2025 edition highlighted an “architecture of care,” the 2026 edition shifts its focus toward agency, celebrating practices that actively transform their contexts by addressing environmental vulnerability, social inequity, and spatial displacement. The selected practices span extreme environments, informal cities, and rural communities, utilizing tools that range from digital fabrication and robotics to Indigenous knowledge and archival research.

As Christele Harrouk, Editor-in-Chief of ArchDaily, states:
“In 2026, agency speaks to architecture’s capacity to influence social, environmental, cultural, material, and spatial conditions.”

We are honored to be part of this international cohort and grateful to the ArchDaily editorial team and the expert jury for recognizing our work. What’s next is not defined by a single approach, but by the capacity to respond to specific realities while opening new possibilities for the discipline.

Thank you to our entire team for making this possible every day and everyone who has been part of our journey over the past four years. And LAGUNA to host us everyday.

Full article: https://lnkd.in/gXY6iTtH

CORNCRETL featured in FRAME Magazine 🌽Our project has been included in the selection of 5 innovative projects turning wa...
28/08/2026

CORNCRETL featured in FRAME Magazine 🌽

Our project has been included in the selection of 5 innovative projects turning waste into wanted products. Thank you to for the feature and for sharing CORNCRETL, a project developed in collaboration with WASP, ZEITGEIST Structures, and Taco Kween Berlin.

We’re excited to continue exploring new ways of transforming waste into valuable materials and products. ♻️

Esto es MANUFACTURA 👩🏼‍🔧👩🏻‍🔧👩🏽‍🔧🧑🏻‍🔧Asi vivimos el verano 2026 en el taller 🧡 Estas fotografías capturadas por la fotógr...
27/08/2026

Esto es MANUFACTURA 👩🏼‍🔧👩🏻‍🔧👩🏽‍🔧🧑🏻‍🔧
Asi vivimos el verano 2026 en el taller 🧡

Estas fotografías capturadas por la fotógrafa neoyorquina Julia Le, guardan un pedacito de lo que fueron estos cuatro meses: tres nuevos proyectos que pronto revelaremos, muchos procesos, experimentación, manos llenas de material, risas, estrés, muchísimos chocochatas de BUNA , conversaciones de todo y, sobre todo, mucho trabajo y aprendizaje compartido.

Estoy eternamente agradecida con mi equipo. Disfruté muchísimo este verano a su lado y sin ustedes el proyecto no vive. 🫂

Esto es MANUFACTURA: un proyecto profundamente humano que no solo crea y produce por producir, sino que también forma, comparte conocimiento y genera capital humano. 🫶🏼

•

Este fin de semana celebramos nuestro Taller de Impresión 3D con Cerámica, en colaboración con .azul.ceramica en nuestro...
13/08/2026

Este fin de semana celebramos nuestro Taller de Impresión 3D con Cerámica, en colaboración con .azul.ceramica en nuestro taller en 🌀

Compartimos algunos de los resultados de nuestros estudiantes, quienes aprendieron a diseñar y fabricar objetos mediante impresión 3D en cerámica utilizando nuestro brazo robótico.

¡Muchas gracias a todos por sumarse a nuestra comunidad y por manufacturar con nosotros! 🫶🦾

Los esperamos en próximas ediciones… 👀

•
Tecnologia DigitalFabrication RoboticFabrication

29/06/2026

Así es un día en MANUFACTURA 👩🏼‍🏭
Narrado por Dinorah Martinez Schulte
En Laguna

•

Dirección

Mexico City
06720

Teléfono

+525539731975

Página web

Notificaciones

Sea el primero en enterarse: le enviaremos un correo electrónico cuando MANUFACTURA publique novedades y promociones. Su dirección de correo electrónico no se utilizará para ningún otro fin y puede darse de baja en cualquier momento.

Contactar Con La Empresa

Enviar un mensaje a MANUFACTURA:

Atajos

Compartir

Empresas De Mejoras Para El Hogar cercanos