Lee’s Lumber

Lee’s Lumber What once was a hobby has now evolved into a business. Creating custom wood pieces from bare logs.

Here's a couple of cribbage boards made with Sycamore. If interested let me know. I can also put carving in the middle ...
09/07/2026

Here's a couple of cribbage boards made with Sycamore. If interested let me know. I can also put carving in the middle if wanted(picture, name,etc.).

Four more boards done.
08/25/2026

Four more boards done.

I got those 2 Pine log cants and red oak cants on the small mill. They yielded 1400bf. Still have 3 maple logs cants and...
08/19/2026

I got those 2 Pine log cants and red oak cants on the small mill. They yielded 1400bf. Still have 3 maple logs cants and Sycamore cants left to do. Waiting on some new saw blades.

Couple of good days on the mill.2 Norway spurce, 3 silver maples, and 1 Sycamore sized from 42"wide to 54". Suprised I o...
08/11/2026

Couple of good days on the mill.2 Norway spurce, 3 silver maples, and 1 Sycamore sized from 42"wide to 54". Suprised I only hit 2 nails.Now over to smaller mill to cut into lumber. Should yield about 3500 board feet.

Next up, a 54" wide pine.
08/09/2026

Next up, a 54" wide pine.

My short piece pile was getting to big, so I made a few cutting boards.
08/08/2026

My short piece pile was getting to big, so I made a few cutting boards.

New quarter sawn white oak. Sandblast and fresh paint.
08/06/2026

New quarter sawn white oak. Sandblast and fresh paint.

Big Sycamore 48"dia. Started on the big sawmill(54"cut). Then moved over to smaller sawmill to finish off. Cut some 6/4,...
04/02/2026

Big Sycamore 48"dia. Started on the big sawmill(54"cut). Then moved over to smaller sawmill to finish off. Cut some 6/4, 5/4, and 7/8" for draw boxes. Got about 600bf out of it.

With the cutoff on the end, I thought it would make a good corner table.
03/28/2026

With the cutoff on the end, I thought it would make a good corner table.

I've been 2d carving with cnc for about 2 1/2years. I decided its time for 3d.
03/13/2026

I've been 2d carving with cnc for about 2 1/2years. I decided its time for 3d.

Address

Milo, IA

Website

Alerts

Be the first to know and let us send you an email when Lee’s Lumber posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Lee’s Lumber:

Shortcuts

Share

Category